location:Home > Product > Dryer > Products

Slag dryer

Slag dryer
 

Introduction

Slag dryer is a professional rotary dryer to dry slag, mainly composed by rotary cylinder, lead wind equipment, high-speed scattered equipment, lifting plate，the cleaning device, gearing, transportation equipment, hot air equipment, reducer, supporting device and sealing device and etc. Parts. Our company produces slag dryer with the reasonable design, well made processing, stable performance, advanced technology, high output, low energy consumption, a small covering area, high mechanization degree.

Characteristics

Our company produces the slag dryer has the following features:

1. It can meet different users requirements of grain size and water to fly ash material such as slag after drying;

2. Equipment capacity and resistance to overload ability are bigger , fuel consumption is less, can directly reduce dry cost;

3. Equipment in the design in order to achieve the best drying effect, use downstream, materials and heat drying ways by the same side into the air drying equipment, dryer output temperature is low, thermal efficiency is high;

4. The equipment uses the new feeding and discharging device, to eliminate the slag dryer feeding jams, discontinuity, uneven returning material phenomenon, reduce dust removal system load;

5. The equipment is achieved in the internal structure of innovation to strengthen the cleaning of already scattered material and heat transfer effect, eliminate the sticking phenomenon inside the cylinder.

 

Model Shell diameter(mm) Shell length (mm) Slope(°) Rotary speed(r/min) Weight(t) Power(KW) Volume(m3)
MD0.6×8 600 8000 3-5 8 5.1 6-4 2.26
MD 0.8×10 800 10000 3-5 7.2 6.9 6-4 5.02
MD 1.0×10 1000 10000 3-5 6.73 7.5 6-5.5 7.85
MD 1.2×12 1200 12000 3-5 5.8 13.1 6-11 13.31
MD 1.5×12 1500 12000 3-5 4.8 22.3 6-15 21.2
MD 2.2×14 2200 14000 3-5 3.2 52.8 30 53.22
MD 2.4×18 2400 18000 3-5 3 73.3 37 81.43
MD 2.8×24 2800 24000 3-5 2.59 97 75 147.8